How To Get Rid Of Algae Dust In Pool

Swimming pools are a favorite place for people to enjoy a refreshing dip. But, could it be the grounds that are far more beautiful than the pool itself? The more you treat the beds in your pool, the better they will look.

How to Get Rid of Algae Dust in Pool

And, keeping them looking great isn’t easy; you need to either buy unique algae cleaners or spend hours poring over its manuals to figure out how to do it yourself. Stay away from both if you want to get rid of algae dust in your pool quickly.

Here is a straightforward guide that shows you how to get rid of algae dust in your pool with minimal effort.

 

What Are The Reasons Behind Algae Dust In A Pool?

Here are a few reasons why algae dust appears in the pool:

Low water level:

If your pool is not being filled to its total capacity, then there will be a lot of algae dust and debris floating around that can get into the filter system and eventually end up on the floor of your pool.

Moreover, the water level in your pool is low; then, the algae will grow faster.

Poor filtration system:

If you have a poor filtration system that lacks proper cleaning action, it can cause dirt and algae dust to get trapped inside the filter and eventually fall on your floor. Plus, it can also create a lot of algae dust.

Excess chlorine:

Chlorine is a very effective chemical that can remove algae dust and other unwanted organisms in your pool, but too much of it can also lead to the formation of dust particles on your floor. This will be because chlorination impacts the pH level of your pool water.

Poor circulation system:

If there is no proper circulation in your swimming pool, then it can lead to algae dust and debris being trapped inside the filter and eventually end up on the floor of your pool.

Poor skimmer system:

The skimmers are the most crucial part of your pool’s filtration system, and if they don’t work correctly, it can lead to much dirt getting trapped in them and eventually end up on your floor. This will also cause a lot of algae dust.

Poor filtration system:

Suppose your pool has a poor filtration system. In that case, it can lead to algae dust and debris getting trapped inside the filter and eventually ending up on your floor, ultimately causing you all sorts of problems such as algae growth and algae dust.

Poor pool maintenance:

You need to make sure that you maintain your pool regularly and adequately so that no debris or algae dust around in it. When the water level drops, this will also mean much junk can get into your filter system, which again ends up on your floor.

Poor pool chemicals:

If you use poor quality pool chemicals, it can lead to dirt and debris getting trapped inside your filter system, which again ends up on the floor of your swimming pool, ultimately leading to algae growth and algae dust in the water itself.

 

Disadvantages of Having Algae Dust In a Pool

Here are the disadvantages of having algae dust in your swimming pool:

  1. You will have a lot of algae growth and algae problems with it

When you have algae dust or debris floating around in your pool, there is no water flow, making the bacteria unable to do their job properly. This can lead to algae growth and eventually lead to algae problems.

  1. Your pool will not look as good

If you have alga dust floating around in your swimming pool, it can lead to the water being discolored, which is very unsightly, especially if you cannot clean it.

  1. You will need much maintenance

When you have a pool with algae dust around in it, you will have to do more work on your swimming pool as the water is not clear, which means that there is a lot of water maintenance involved.

  1. You will have to clean it more often:

If you cannot keep the pool clean and clear, then there is a possibility that you may end up having algae dust problems in your swimming pool which means that you will need to do more cleaning and maintenance.

  1. Your pool will get discolored:

If you do not clean your swimming pool properly, then there is a possibility that the water can get discolored, which means that it will look very unsightly, especially if you cannot clean it.

  1. You will have to replace the filter more often:

By not cleaning your swimming pool properly, then there is a possibility that you may have algae problems, which means that you will need to get new filters for your pool, which can be very expensive.

  1. Your pool will have a foul odor:

There is a possibility that the water can get discolored, which means that it will look very unsightly, especially if you cannot clean it. This also leads to a bad odor which is very ugly.

 

6 Most Effective Ways To Get Rid of Algae Dust in Your Pool

Here are several ways to remove algae dust from your pool:

1. Use a vacuum cleaner

Removing algae dust can be as easy as just vacuuming the walls and surface of the pool.

Firstly, you can vacuum algae dust through the waste method. This is the easiest and safest for the equipment.

If you have a multiport system or you have a plumbed waste line on your system in front of the cartridge filter, you can set up your waste line and simply vacuum the algae out of the water.

However, you must be careful as the water will be flowing out of the pool quickly. Don’t let the water level drop too low.

When the water level reaches 6 inches, you can refill the pool and repeat the process until all of the algae dust in the pool has been removed.

 

Another way you can remove algae dust using a vacuum cleaner is through your filter. For this method, it is preferred you use an old cartridge which can be disposed of afterward. You can begin vacuuming normally, picking up algae dust as you go.

If your filter is letting the dirt and algae get past and if it’s blowing it back into the pool, your filter needs attention. You can also try cleaning the cartridge several times.

Once done, you can restart the system in stages so that algae dust does not get blown back into the pool. This method requires more effort and time as compared to the waste method. You can also remove algae from the pool without a vacuum.

 

2. Use a pool cleaner

If you cannot use your vacuum cleaner, then there is another way to use it: a pool brush or an attachment on it if the one that comes with your swimming pool has this feature.

Make sure that you clean your pool thoroughly before you use it to remove the algae dust because if there is any debris left in your swimming pool, this will result in a bad smell and unsightly.

 

3. Use chemicals

If you do not want to buy chemicals to clean your swimming pool, you can use an algae remover to remove the algae dust from your swimming pool.

This is a very effective way of removing the algae dust from your pool, and it will also help keep it clean. You should make sure that you read all instructions before using this product on how much water you should put in your pool.

 

4. Add chemicals and test your water

It is true that using shocks or doses of chemicals and balancing the pH of your water helps you to get rid of algae dust in your pool quickly and effectively. To balance your water chemistry, you can use different types of equipment such as test strips, a digital kit,s or a liquid test kit.

High pH or low alkalinity will inhibit pool shock, which kills algae dust. The benefit of adding shock to your swimming pool is that it super chlorinated your water.

This works like a sanitizer which eliminates algae growth. Usually, calcium hypochlorite, chlorine shocks are used. The amount of chemicals added depends on the pool size and the type of algae.

As mentioned above, there are three types of algae dust. Green algae will require less shock and dosage as it is easier to clean. However, black and yellow algae require more shocks and dosage to eliminate the algae which have grown in your pool.

They are an effective treatment for algae dust growth. Experts recommend that you do this during the night, as the shock will not be effective during day time. This is because the sun will eat up most of the chlorine before it can kill the algae.

Next, you must run your filter overnight or for more than 8 hours to circulate the shock and kill as many algae as possible.

If there is still any algae left in the pool, you can do some scrapping or simply add a few more doses of shocks.

 

5. Use Epsom salt

As compared to normal pool salt, which is just sodium chloride, Epsom salts contain many other chemicals. They are Magnesium salt compounds and can be used to help get rid of algae dust in pools.

Epsom salt itself doesn’t kill the algae dust but instead makes it easier. It travels through the saltwater pool filters and chlorine generator cells and softens the buildup which makes it easier to clean the algae.

Before attempting to clean the filter, just add 35-45 lb of Epsom salt in the pool and allow it to circulate for a few hours.

After a few hours clean the filter and chlorine cell generators so that they can prevent the formation of algae dust.

However, you must be careful that the salt has dissolved completely before attempting to clean the pool as it can damage the traditional filters and chlorine generator cells.

 

6. Use an algae scrubber

Although this might seem like a time-consuming and difficult task, it can actually be very effective! The algae dust is very fine and soft and can be easily removed by just rubbing it with a brush.

The pool brush is a long handle and at the end of the handle, a horizontal brush, usually with hard bristles, is attached.

To remove the algae from the wall and bottom of the pool, you must vigorously scrub the places which contain algae.

For more convenience, it would be recommended if you apply a green algaecide and let the water circulate for 24 hours.

The algae will soften and then you can brush the surfaces again and use a vacuum to remove the remaining dead algae.

This method can be time-consuming and will require great effort, but it can be very effective in eliminating the algae dust and making your pool look clean and healthy.

 

Things to remember while removing algae dust from the pool

Here are a few things that you should remember while removing algae dust from your swimming pool:

  1. Water level:

Make sure that you check the water level in your swimming pool before starting any of the above methods. If the water level is too low, then it will be challenging to get rid of all of the algae dust, resulting in a foul smell and damage to your swimming pool.

  1. Temperature:

The temperature of your swimming pool is an essential factor that you should keep in mind while removing algae dust from the pool and making sure that it does not go above 30°C; otherwise, this will result in a foul smell and damage to your swimming pool.

  1. Amount of water:

Make sure that you check the amount of water in your swimming pool, and this will help you know when it is time for a clean-up. You should use about half a cup per gallon (1/2 cup) or 1 tablespoon per 4 gallons (1 tbsp. per 4 gallons) of water, and this will help you remove all kinds of algae dust from your swimming pool.

  1. Dose:

You should know the dose that works for you when it comes to removing algae dust from your swimming pool, but make sure that there is no chlorine in your pool as this will result in a bad smell and damage to your swimming pool.

  1. Water quality:

Ensure that the water quality in your swimming pool is good before starting any of the above methods, and this will help you remove all kinds of algae dust from your swimming pool.

How do you know when to start cleaning the pool, and how often should it be cleaned?

It is essential to clean your pool every two weeks, and this should be done using one of the methods mentioned above. It is also necessary to know when it is time for a clean-up, and this can be done by looking at the following signs:

  1. The water level in the pool should not go below 1/4 of an inch (2 mm), or else you will have problems with algae dust.
  2. The water level should not go above 1 inch (25 mm), and this will help you remove all kinds of algae dust from your swimming pool.
  3. You should also notice that the color of the water is changing slowly, and this will be a good indication to know that it is time for a clean-up.
  4. The water should not have an unpleasant smell, which will help you remove all kinds of algae dust from your swimming pool.
  5. You should also make sure that the pH level of your swimming pool is good before starting any cleaning process, and this will help you remove all kinds of algae dust from your swimming pool.
  6. You must also ensure that the chlorine level is low before starting any cleaning process, and this will help you remove all kinds of algae dust from your swimming pool.

How do you know when your pool is completely clear of algae dust and ready for summer?

There is no definitive answer, as this will depend on various factors, including pool size, water temperature, and the type of filter system in place.

Generally speaking, however, if you can see the bottom of the pool without using a ladder or diving board, it is usually safe to assume that your pool is free of algae dust.

The best way to check if the water in your swimming pool has been cleared of any algae dust is by using an infrared thermometer, which will give you a reading on both the temperature and humidity level at all times.

This should be done throughout the entire pool, and the temperature should be below 80 degrees Fahrenheit (26.7 °C).

 

Final Thoughts

Algae are a common problem in swimming pools, and it can be challenging to remove all traces of algae dust. The above-discussed methods should help you to clean your pool quickly and effectively.

To ensure that your swimming pool stays clean and free of algae dust, you should always keep the pH level in good condition.

This will help prevent any type of algae from growing inside the water.

Leave a Comment