Pump pool vacuums are a popular choice for cleaning pools, but it can be tricky to get the hang of it. They are not as simple as they look, and using them can require patience and attention to detail.
A powerful, efficient pool cleaner needs to be used with the proper pump and vacuums.
It is one of the best machines to have around your pool. It provides your pool with the filtration it needs to stay clean and healthy.
Hayward manufactures a wide range of pool pumps and accessories. Many pool owners have questions about connecting a Hayward pump to their existing vacuum system.
What is a Hayward Pool Vacuum Pump?
A Hayward pump is a vacuum breaker that pumps various liquids into your pool. The liquid is then filtered, and the water you used to clean your pool remains in place.
There are several filters on these vacuums so that you can choose one suited for different applications or cleaning situations – such as heavy debris and sand or light dirt.
The pump allows you to vacuum your pool and return the water to your skimmer. It is made up of material that is resistant to low-water pressure limits.
This prevents it from breaking down after heavy use and strain on the unit and handling several dropouts or failures. It can also be upgraded with filters that adjust water pH levels.
The cleaning power of Hayward Pool Vacuum Pump
Hayward pump can process hundreds of gallons per hour. This means that you can clean your pool quite quickly, catching all kinds of substances in its filter.
The cleaning performance is impressive and hard to beat, especially because Hayward Vacuum Pumps are relatively inexpensive compared to other vacuums.
This versatility allows you to use it for various swimming pool cleaning jobs or aquarium filtration duties.
For example, if your spa is clogged with dirt and debris from a hard winter’s snowfall isn’t coming out quickly – the pump can come in handy by sucking up any waterproofing compounds left on the walls of your spa or swimming pool.
Features of Hayward pool vacuum pump
The main features of the Hayward Pool Vacuum Pump are:
- It has a pressure gauge for ease of orientation.
- It has a built-in filter that can be changed depending on what type of cleanup you need.
- The pump allows for easy vacuuming and returning the water to your skimmer.
- The material is resistant to low-pressure limits, meaning it will last longer and hold up better under stress than other pumps.
- Allows you to use it for various pool cleaning/filtering jobs and aquarium filtration channels, such as spa scrubbing.
- The pump is easy to install can be installed in an existing vacuum upright position on an existing
- Though it is expensive, the upgrade to filters makes this inexpensive by comparison with other vacuum pumps in this category.
- When full flow mode is engaged, the unit’s efficiency reaches over 85% of its total capacity.
Additionally, Hayward pool vacuums come equipped with aquaction filter technology, which can be removed and changed as needed.
Steps To Hook Up Pool Vacuum to Hayward Pump
Here are some steps in this regard.
Take the hoses off of the pump:
Take the hose off the outside tubing/lytic and inside water inlet. Measure the amount of water being pumped out, then measure that again on the clean side of the pump sucking area (now with the hose off), and if the difference is higher or the same, add a Hose clamp 1/4 turn (-).
Install the Return Valve:
Install a return valve, allowing a small amount of filtered water to flow through it by turning a single knurled knob on top that is accessible with your fingers. Pay special attention not to tighten too much as this will create debris inside the return line, which can clog up your vacuum pump within days! Some are removed for better look /flow preference, but the factory install is often satisfactory.
Install the O-ring on Inlet Valve:
Install o-ring (usually included) on inlet valve nipple. If you did not remove the hose clamp during step 1, install it now by turning the handle clockwise until tightened slightly against the stem, then tightening the hose clamp bolts as necessary.
Attach tubing to OUTLET VALVE NIPPLE!
Reattach blue and black hoses to outlet valve nipple by gently squeezing and twisting on them until snug against nipple – do not overstretch hose! Be careful to keep connections clean and free of debris; if necessary, use a small brush or soft, sharp needle to pull off any dirt.
Install the Screen or Bucket:
If your pool has a screen (filter) assembly, attach it by removing and replacing the broken plastic clip /ring to secure the old screen. If an additional bucket pulls out of the neck tube (and was NOT part of the original setup), slides on the new nose cone into place.
Final Step: Install the top cap!
This is usually just a rubber ring part of an old, larger pump and will fit over the existing o-ring.
Final tightening should be very snug – if it feels loose, tighten compression screw-on tube’s side to adjust until even pressure throughout entire system!.
Lastly, fill with filtered water with several inches between the top hole nipple and air intake for your vacuum pump (diameter of water pipe should be slightly greater than vacuum pump diaphragm) to ensure a complete seal.
Now you can install the impeller on a motor if desired, turning it by hand to push air through a vacuum pump. Use medium-sized adhesive glue (super glue) to secure the impeller to the shaft where you want to push air through the pump.
Overall, the Hayward pump is a good choice as long as certain essential precautions are taken.
In many cases where Hayward pool pumps don’t work correctly, the problem is often due to either failure of the impeller (wastewater pump) or air connection.
This can be prevented by using only high-quality materials in installations and by setting up the system so that it will not allow any air to enter or escape!