Pool Blaster Aqua Broom Not Working? (5 Quick Solutions)

One of the joys of having a pool is the way it can transform a garden into a water-lapped wonderland. Your kids will have so much fun playing in and around the pool that you won’t even have time to clean the pool on your own.

Pool Blaster Aqua broom Not Working

While cleaning the water from the dirt is essential, this kind of cleaning work only takes a few seconds. It is comparatively low on the list of utilities that need to be provided by swimming pool pumps.

The Aquabroom is a remarkable device that can turn any pool into an entertaining water park. A pool blaster Aquabroom is an attachment that helps have a pool cleaner in your backyard.

It works as an attachment to any pool that needs cleaning.

What is a pool blaster Aqua Broom?

The pool blaster Aqua broom is a device that can help you clean the water more efficiently. It consists of an attachment with its pump and additives system. They can clear the pool of specks of dust in just 5 minutes or less.

However, it also helps get rid of dangerous chemicals such as Chlorine smell and other strong smells found above ground swimming pools like; bottom cleaners do not work on oils-based residues below their surface, but they are an excellent way to get rid of the chlorine smell.

The pool blaster Aquabroom works in any swimming pool. It can be used to clean a small area up to 10 x 20 meters depending on the size and shape of your pool.

The water pressure is more than enough for cleaning, so you do not need to go beyond the area that has been cleaned.


Why is Pool Blaster Aqua Broom Not working?

There could be a few reasons why the pool blaster Aquabroom is not working.

  • The power cord may be disconnected or damaged.
  • There could be a clog in one of the filters or nozzles.
  • The pool blaster Aquabroom might need to be recharged.
  • Pool blaster Aquabroom might not be installed correctly.
  • The pool blaster Aquabroom might not be correctly connected to the power source.

How To Fix The Pool Blaster Aqua Broom Not Working?

Here are some ways to fix your pool blaster Aquabroom if it is not working correctly.

  • Try charging the pool blaster Aquabroom by connecting it to a power source.
  • Ensure that the pump’s water pressure doesn’t exceed 5 bar since this is the maximum pressure allowed in your swimming pool.
  • If the pool blaster Aquabroom is not working, it means that one of the filters or nozzles is clogged and needs to be cleaned or replaced.
  • To prevent further damage to your swimming pool’s filtration system, ensure all power cords for both motors are correctly connected to the power source.
  • If there is still debris inside your filters or nozzles, remove them and clean or replace them with a new one using intense water pressure (no less than 5 bar).


Pool Blaster Aquabroom

Features of pool blaster Aqua broom

This unique device can be used by anyone looking for an effective and fast pool cleaner.

Its attractive design, easy-to-use vacuum technology, and motorized water jets make the best choices for any homeowner who has decided to install their pool cleaning system in their yard.

You only need a few minutes before we present you with all its great features to prove this point!

1. Ease-of-use feature:

It has been designed for quick and straightforward use. All you have to do is fill up the filter with a pre-treatment solution.

Install it on your swimming pool, then adjust according to the twisting knob.

Pull towards the pump to start operating!


2. Powerful cleaning effect:

With its 4 powerful water jets that can clean an entire pool in less than just 15/20 minutes, it is without a doubt the fastest and most effective filter to attack algae. This means that you don’t have to wait until your swimming pool colors or clear up before using this system.


3. The Biggest Pool Blaster ever made:

With over 1,000 ppm in the water jet and 4 different resistance settings to choose from (if you want a deeper clean), it is undeniably the most potent pool blaster ever.

This power can remove dust, un-attackable bacteria, and waste products of animals such as dog hair, which other cleaners cannot do!


4. The ability to clean above ground pools:

Pool blaster has not just been designed for straight pool owners. It is considered one of the most powerful swimming pool cleaners in existence today – no matter it’s kind or size, and that’s why it can be used on any real or plastic swimming pool.


5. Ample filtering intake with 360 degrees cleaning effect:

Its powerful spraying pipes and nozzles that can separately spray the water in different directions allow you to better clean even tricky areas such as corners or walls of your swimming pool.

It could also be used to treat pools suffering from many air bubbles, forming an excellent bubble barrier on all levels!


How Pool Blaster Aquabroom Works?

The pool blaster Aquabroom is a robust yet extremely easy-to-install water filtration system. It has been designed for anyone who wants a quick and efficient way to clean their swimming pools.

It utilizes the power of 4 jet nozzles and two filters that eliminate 99% of all dirt, algae, and waterborne particles of up to 99 microns.

The nozzles are installed on the ceiling and move in different directions, releasing a powerful jet of water that can reach speeds greater than 1000 ppm (1 m³/h).

The filters effectively eliminate all dirt, bacteria & other dangerous particles from the water by trapping them into a filter bag which can be quickly emptied.

The two filters are made of high-quality granulated activated carbon (GAC). They do not require any chemicals or additives to function, unlike other pool cleaners that use chemical detergents.

Since it utilizes only water, no chemicals or additives need to be added. It has a low energy consumption, so it doesn’t require any special installation tools.

Just attach the filter bags into your pool’s filtration system with the included screws.


Final Thoughts

The pool blaster Aquabroom is an excellent and efficient way to clean your swimming pools. It works very well for cleaning small or medium-sized pools with a depth of up to 6 feet (1.83 meters).

If it is not working, follow the instructions mentioned above, and your pool blaster Aquabroom will be back to work!

Leave a Comment