Summer Waves Pool Pump Reset Button Not Working

Swimming pools offer one of the best outdoor sports. Swimming is not only a beneficial exercise but also a fun-filled activity. In addition, swimming helps you to reduce stress and feel relaxed.

In short, if you want a day away from the hustle and bustle of your daily routine, and to relax your mind and body, you need to spend the day at the pool.

Summer Waves Pool Pump Reset Button Not Working

However, there are a few things that keep the pool functional and the most important is the water flow. Now, what keeps the water flowing in a static pool.

For this purpose, pool pumps are available in the market. Polygroup’s brand Summer Waves has produced high-quality and efficient pool pumps that circulate the water in the pool.

The company emphasizes the importance of sports and health and creates a variety of products that are essential for both health and pleasure.

 

Problems in Working of Pool Pumps

Pool pumps are great and vital for the health of the pool. However, problems can arise in its functioning. But the good news is that most of the time, you can solve the problems by yourself.

Some of the commonly occurring problems and their solutions are discussed next.

1. Reset Button Does Not Turn On

The most common problem that disturbs the functioning of the pool pump is that the reset button does not turn on. It can be an electrical problem. I do not recommend you to dismantle the unit to look for the fault. Your warranty could as well be voided if that were to happen.

To resolve this, make sure to check your connections and see if any fuses are blown. If it does not help, ask a professional technician. If this happens within the warranty period, please return it and get a new one.

 

2. Pool Pump Does Not Create Enough Water Flow

Sometimes the pump does not create optimum water flow. This problem means that your pump requires a thorough cleaning. It can be due to interruption in its suction because of blockage.

To check the suction of your pump, see the reading of your filter gauge. If it is 10psi above the average reading, clean the filter.

If the low water flow is due to excessive air in the system, make sure that the water level of your pool is not below the average level. Also, check the skimmer basket for any debris.

 

3. Pool Pump is Leaking

Another major problem with pool pumps is to have a leaky pump. In most cases, this is because of a pressure-side leak.

To overcome this issue, check the impeller housing o-rings and shaft seals. Replace all the cracked or damaged o-rings and seals with new ones.

 

4. Pool Pump is Sucking in Air

Next in the list of pump problems is the suction of air in the pump.

It can be due to many factors such as improper fixing of the lid, defects or damage in the pump, a leak in the valve system, an air leak in the suction line, or faulty o-rings and impeller baskets.

 

5. Pool Pumps Creates Loud Noises

Although it is common for the pumps to create some tolerable noise. But if the pump creates noise that exceeds the normal range, look for any large particles or blockage substances that may hinder the flow of water.

In some cases, the motor of the pump starts to produce louder and more annoying noises than usual. It is usually because of a problem with the bearings. For this, call a professional and get your bearings replaced.

Read: How Long Should A Pool Pump Motor Last

 

6. The Basket Is Not Filling with Water

The purpose of the basket is to filter debris from the water. It is possible if the basket fills with water.

How is the basket supposed to collect debris or rocks from water when it is not filling with water? It can be due to air suction or clogging of the pump basket.

To resolve this issue, clean the pump basket and the filter.

If you doubt that the problem is of air suction, check the water level in the skimmer. If it is low, look for the air leaks and then repair them.

 

7. The Pump Creates a Sound but Does Not Start

The most common issue caused by pool pumps is that they produce a low humming noise but do not start. The first thing you need to do is check the impeller for any debris that may cause blockage.

To do this, remove the screws on the pump housing and remove any debris. Assemble the parts and put the pump back together.

If humming sounds are audible, it means that these are coming from the pump motor. The motor is receiving power but has trouble starting.

It could be due to various reasons such as a bad capacitor, or a build-up of dust or rust. Open the pump and remove the dust particles. If the motor is rusting, call a technician and replace it.

 

Pool Pumps

Pool pumps are often referred to as the heart of the pool. This analog is used to describe the importance of a pool pump in a pool. The function of the heart in our body is to pump blood throughout our bodies.

In addition, the blood that the heart pumps to all parts of the body is clean and rich in nutrients.

If the heart fails to perform its function, we will face difficulty in surviving and ultimately die. In the same way, the pool pump is essential for maintaining the flow of water in the pool.

It also ensures equal distribution of chemicals in the pool water.

These chemicals play a role in sanitizing the pool water hence, keeping the pool water clean and healthy. The pool pump also carries water to other units such as; filtration, chlorination, and heater.

In the filtration units, the water gets filtered, and debris and dust are removed.

The chlorinating units add chlorine to the water to kill the bacteria and germs, keeping the water healthy and safe. Whereas the heater increases the water temperature in winter.

 

Conclusion

Pool pumps are a must-have for a healthy and effective pool. But they also have some common problems. To resolve such problems, the above guide will be helpful.

Leave a Comment